|
|
Post by timmy24540 on Jan 11, 2008 9:19:37 GMT -5
I have seen a lot of you have the BFG 33/10.50/15 tires with stock rims. I have noticed that wheel spacers were used on some, are they needed? I just ordered mine and was looking at this site for pics and noticed this. I have a 1" BL with an OME lift and a 1" bump stop in the front and rear. Thanks..........  |
|
|
|
Post by sylvanis on Jan 11, 2008 14:09:51 GMT -5
I don't use them...I don't see the need either, considering that stock rubi tires are about 10.5" wide. I'm sure that the backspacing difference between the stock wheels are the same.
|
|
|
|
Post by moneypit on Jan 11, 2008 20:09:26 GMT -5
Timmy ,I think you will be fine. The only thing that may be an issue is at a full tight turn. You may get some rubbing because of the larger diameter of the 33's. We still have to put the son in laws OME lift on. He has a 1" BL on already. He's got the stock Rubi wheels he wants to keep. So I am very interested when you get yours on how they work. If there is any rubbing the steering stops can be adjusted.
|
|
|
|
Post by timmy24540 on Jan 11, 2008 20:25:41 GMT -5
Thanks for the replies on this post and the others. As soon as I get them mounted on I'll take a few pics and give you some feed back on the rubbing(?) and other stuff.
|
|
|
|
Post by nfunlimited on Jan 15, 2008 15:11:55 GMT -5
I have em and love em. Since I don't have a longer track bar and the axle is a little off center, I only had to adjust one side on the steering stop. I don't have the spacers. Excellent size. Before I adjusted the stop it used to rub on full turn.
|
|
|
|
Post by timmy24540 on Jan 17, 2008 22:57:13 GMT -5
Got the tires today. I'll get them mounted as soon as I can. With pics of course....
|
|
