FabTech bumper install

[surfnsnow]

I ordered a FabTech bumper last week and it came yesterday and I was able to install it in less than an hour. Here's the photos with some write up.
Overall, I'm pretty happy with it but the only down side is that you can not use your fog-lights on the bumper unless you lengthen the wire from the wire harness to the light. Here's the photos:
Right out of the box


OEM bumper comes off with 6 55-torx bolts


Installed:


Fog light connectors zip tied out of the way:


With the shackles on:

[n3cr0shark]

You can get fog light wire extensions for around $20-25 from Mopar (or 3rd party Dealer) if that helps....

LOOKS GOOD though!

[surfnsnow]

Cool, thanks for the info. I'll see if I can find some tonight

[moneypit]

Looks good. Are there light tabs welded on already or do you drill where you want the lights?

[Ridge]

I agree, looks great! I'm wondering the same thing as moneypit, any light tabs? It looks like there are two on the bumper but I can't tell for sure.

[treeofliberty]

Fabtech's website claims it has two tabs, which is supported by this picture:



That's a good lookin', no nonsense bumper.

[surfnsnow]

Yeah it's got light tabs on it ready to go. the OEM fog lights wiring harness is too short but I was able to order the extension wires for $30 (thanks shark). It also comes with the optional steering box skid place that I have to install as well, that's what sold me on it in the first place