|
|
Post by readonly on Sept 15, 2005 18:21:11 GMT -5
|
|
|
|
Post by salyers890 on Sept 15, 2005 18:24:33 GMT -5
|
|
|
|
Post by readonly on Sept 15, 2005 18:31:14 GMT -5
|
|
|
|
Post by salyers890 on Sept 15, 2005 20:40:45 GMT -5
looks great, is the ride difference as good as they advertise? did you have alignment problems or was it pretty straight forward?
|
|
|
|
Post by readonly on Sept 16, 2005 11:43:13 GMT -5
Thats just the body lift and the motor mount lift, the spring/shock changeout will occur this weekend. I do notice I am sitting higher, and the motor mounts are more stable than before I think, because my whole body is shaking less than before when idling the motor which makes me believe they are absorbing more of the vibrations (perhaps the 1.25" body pucks are as well)
|
|
|
|
Post by RubiRedLJ on Sept 16, 2005 11:52:22 GMT -5
Looks good!
It's amazing the clearance a 1.25" BL will give you.
Did you use M.O.R.E.'s rubber torsion "Bomb-Proof" motor mounts? Or a spacer?
ryan
|
|
|
|
Post by readonly on Sept 16, 2005 13:49:32 GMT -5
used the JKS aluminum BMML - they are just 1" thick aluminum blocks that go underneath the stock motor mount, with a stud extension for the stock mount, and a replacement bolt for the other side of the mount. I ran into a few issues with the install but those were do to my inexperience, and I could do the BL and BMML in about 5 hours next time I wager.
|
|
|
|
Post by lucasinpsj on Sept 18, 2005 9:58:53 GMT -5
please send pictures of your jeep after you get it finished. This is the same lift i will be installing in the next few months. did you get it from dpg offrosd? if so what kit?
|
|
|
|
Post by readonly on Sept 18, 2005 15:19:10 GMT -5
Yeah, i just finished putting on the suspension lift. I went with the DPG Offroad Deluxe kit. I don't have pictures right now the camera is out of battery, but they are recharging and I should have some pics to post later! Its looking good, all I have left is to install the Quick discos which I am putting off because I am tired as hell and I dont have a grease gun atm for the heim joints.
|
|
|
|
Post by lucasinpsj on Sept 19, 2005 6:32:22 GMT -5
i am going to get the ultimate kit. i wanted the new front and rear track bars. i had used oem track bars before and didn't like it on other jeep :oi had owned. What size tire are you going with? was the lift pretty straight forward to put on.
|
|
|
|
Post by readonly on Sept 19, 2005 9:08:28 GMT -5
|
|
|
|
Post by readonly on Sept 19, 2005 9:24:15 GMT -5
|
|
|
|
Post by readonly on Sept 19, 2005 10:33:31 GMT -5
|
|
