|
|
Post by nfunlimited on Jul 6, 2006 12:01:46 GMT -5
Does anyone have these???
I was wondering how high I could lift the front of the Jeep with the ACOS, without changing control arms.
I was considering the control arms if I needed new ones.
Thanks
|
|
|
|
Post by moneypit on Jul 6, 2006 19:47:52 GMT -5
I have the OME 2 1/2 and have added about 2" with the ACOS w/o any problem.
|
|
|
|
Post by nfunlimited on Jul 7, 2006 6:42:56 GMT -5
Moneypit....do you have the stock control arms??? I know you have the adjustable trackbar, but were there anymore changes other that shocks and springs taht you had to make???
Thanks
|
|
|
|
Post by moneypit on Jul 7, 2006 17:47:51 GMT -5
Still on stock control arms. Seems to work fine. I have not made any other suspension changes....yet!
|
|
|
|
Post by nfunlimited on Jul 10, 2006 6:28:18 GMT -5
So you have about 4 inches lift in the front??? And 2.5 inches in the back???
Thanks again!
|
|
|
|
Post by moneypit on Jul 10, 2006 18:21:23 GMT -5
Thats right. But I have a winch and bumper that takes 3/4" off that. I also like the front higher then the back. It helps with fender rub when disconnected as well.
|
|
|
|
Post by nfunlimited on Jul 11, 2006 12:27:21 GMT -5
No death wobble??? I am surprised (and glad) that you don't need a pitman arm, or control arms, etc. Just the trackbar.
I think I will crank up the ACOS, and realign the steering.
Thanks again......you're always helpful.
|
|
|
|
Post by moneypit on Jul 11, 2006 19:51:11 GMT -5
No death wobble. Trackbar will help alot. I seem to remember reading that the drop pitman arm was only on 6" and above lifts. Also not something you want to do on a DD. Good luck let us know how it works out.  |
|
|
|
Post by nfunlimited on Jul 12, 2006 8:05:39 GMT -5
I think I will rotate and rebalance the tires, then crank up the ACOS. I have to do the trackbar first though.
Thanks again.
|
|
