|
|
Post by moneypit on Apr 19, 2006 20:38:43 GMT -5
I know this is sort of remote but....If you have the OME lift with a Skidrow gas tank skid and Rochcrusher diff covers you will have a problem. I know cause it just happened to me. The bracket on the back of the skidrow gas tank skid is bolted on to the skid. When you get a lot of up down action going the bolt bashes the Rochcrusher diff cover, because its deeper then the stock one. Anyone using Rockcrushers should check their clearance. I had to take the skid out and have the bracket welded on. That little bit made it work.
|
|
|
|
Post by Belfast on Apr 19, 2006 22:13:19 GMT -5
I will have to double check, but I didn't notice any clearance issues with my Warn gas skid (which I believe is very close to the Kilby). It doesn't have a bracket on the back - it is all one continuous piece of metal.
I will post back once I verify if there are issues or not.
|
|
|
|
Post by moneypit on Apr 23, 2006 17:38:02 GMT -5
The differance may be that the Skidrow fits over the stock skid. There is no removeing the gas tank and skid like the others. This may be what causes the problem as the skid goes closer to the rear end to clear the stock skid. I wheeled this thing pretty good this weekend and had no trouble with clearance after welding the bracket on.
|
|
