|
|
Post by bigbubbalj on Jan 24, 2006 0:01:53 GMT -5
guys "really" do a 3" lift (2" spring and 1" coil spacer) and only replace the springs and shocks? or do you think I'll have other problems going up that tall? do I need longer sway bar links? I DO NOT Disco either...Thanks guys!
|
|
|
|
Post by VALJRubicon on Jan 24, 2006 6:28:42 GMT -5
You MAY be able to get away with for a short period, but i would think that you would need to replace the track bar, in order to keep the front axle centered, and your ride would probably get a little ruff because the lower control arms will not have as much down travel. If three inches is what you are wanting I would at least look at a kit that had lower control arms, brake lines shocks, springs. But to answer your question yes it would work, but how well I don't know hope this helped my .05 cents ;D
|
|
|
|
Post by jaymac on Jan 24, 2006 20:53:16 GMT -5
You shouldn't have to mess with brake lines, the front trackbar you can redrill a hole to move it I read a write up on it some where. You will probable need a relocation bracket or an adjustable rear trackbar. Don't know about control arms, you are getting close to vibe problems three in is the cut off before getting into alot of issues, so you won't know until you start on it because they say every jeep is diff. what works for one may not for another. hope that helps a little
|
|
|
|
Post by wv4x4 on Jan 24, 2006 22:20:35 GMT -5
Just Do It!  |
|
