|
|
Post by dblanco on Jan 11, 2006 22:20:07 GMT -5
I noticed a 1" body lift offered on Raingler.com for $107. Has anyone used this lift, and how hard is it to install? Also, do I have to change the motor mounts or anything else along those lines?
Dave
|
|
|
|
Post by treeofliberty on Jan 11, 2006 22:41:59 GMT -5
I believe you'll need to adjust the fan shroud or install a motor mount lift also.
If you do the MML, you'll be raising the oil pan, which is a good thing.
|
|
|
|
Post by wv4x4 on Jan 12, 2006 7:11:33 GMT -5
I run a JKS BL and MORE MML. The MML is nice so you dont have to cut the fan shroud. Just as mentioned above.
|
|
|
|
Post by jaymac on Jan 22, 2006 22:08:52 GMT -5
I have heard it is easier to move the shroud then to do a mml, but when I do it I plan on doing a bl and mml, for the fact that it will set you up for a tummy tuck down the road, and it will also help move you drive line angle back to where it was before I did a bb. both ways will work what you want to consider is where you want the end result to be when you are done, which I don't know if anyone is every completely done modding a jeep!!! ha ha
|
|
